It is the high Molecular Weight and Anionic Degree Anionic Polyacrylamide use for stone making and cutting astewater treatment.
It is for wastewater flocculation sedimentation, sedimentation and clarification treatment.
Soluble in water, safe, non-toxic, hydrolytic stability, is not sensitive to the change of pH value, anti-chlorine. Harmless, no-flammable and non-explosive, it can be stored at room temperature, it cannot be placed in the sun. It is slightly acidic, when skin contact, wash immediately with plenty of water.

Blufloc APAM Specifications:

Appearance:		Off-White Granular Powder
Ionic Charge:		Anionic
Particle Size:		20-100 mesh
Molecular Weight:		High
Hydrolysis Degree:		High
Solid Content:		89% Min
Approximate Brookfield viscosity at 25° C:	@ 1.0%	>2000
	@ 0.50%	>800
	@ 0.25%	>400
Bulk Density:		About 0.6-0.8
Specific Gravity at 25°C:		1.01-1.1
Recommended Working Concentration:		0.1-0.5%
PH (1% aqua solution):		6-9
Storage Temperature (°C):		0 - 35
Shelf Life:		2 years

Blufloc APAM Grade Competitive Advantage:

1	Temperature torerant and Salt Resistant
2	Productivity over 65000mt annual.
3	Non corrosive of suggested dosage, economical and effective at low levels.
4	Can eliminate the use of alum & further ferric salts when used as primary coagulants.
5	Reduction in sludge of dewatering process system.
6	10 years manufacturing experience, with more than 20 technical engineers

Blufloc APAM Application Methods:

1	Dissolving concentration:	Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration.
2	Dissolving time:	The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
3	Agitation speed:	The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank.
4	Application and Dosage:	The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
5	Jar Test:	Put sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60rpm. Determine the flocs properly at this time and note the sedimentation and clarity of top solution.

Blufloc APAM Package and Storage:

Packed in Kraft or PE bags with inner plastic bags, with each bag containing 25kgs, or 750kgs net big bag.
Stored in original packaging in cool and dry place, away from sources of heat, flame and direct sunlight.

CAS No. 9003-05-8 Blufloc Coagulant And Flocculant for Stone Wastewater Treatment

Water Purifying Chemicals