BWD Water Decoloring Agent can be used to treat plastic wastewater. BWD-01 water decoloring agent was launched in the '90s, had been developed by BLUWAT with 20 years, stable quality, it is a new type of high-performance decolorizing flocculant, high performance in de-coloring, flocculating, CODcr decreasing and other applications used to remove the color of wastewater generated by textiles process houses and dyes industries and other fields.
The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water-scarce areas, it comes as heaven-sent facilitating recycling of the industrial effluent into process water. BWD-01 Water Decoloring Agent is used to solve this problem.
Application field: wastewater treatment in the paint industry, industrial wastewater treatment, flocculation water treatment, water clarifying agent, water purifying agents, decoloring agent, cationic polymers water treatment.

Specifications:

Place of origin	China
Product name	Water Decoloring Agent
Appearance	Liquid
Safety	harmless no-flammable
Cas No	55295-98-2
MOQ	1KGS
Brand	Bluwat
Shelf Life	1 Year Proper Storage
Remove	Color remove COD reduces wastewater
Advantage	Faster sedimentation, better flocculation
Application field	Coating Auxiliary Agents, Electronics Chemicals, Leather Auxiliary Agents, Paper Chemicals, Petroleum Additives, Plastic Auxiliary Agents, Rubber Auxiliary Agents, Surfactants, Textile Auxiliary Agents, Water Treatment Chemicals

Competitive Advantage:

1	High-performance treating high-coloring effluent from textile dyeing mills, pigment mills, printing ink, and paper mils.
2	As flocculant to de-color high-colority effluent from dyestuffs processing plants.
3	Stronger decolorization (50%~99%) and removal of COD (50%~80%).
4	Can ben used as a retention agent in the paper & pulp processing
5	Faster sedimentation, better flocculation.
6	Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
7	It can be used before or after biological treatment.
8	Less sludge is produced than other inorganic coagulants.

Application Methods:

1	Before use, make BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution.
2	Make PAC solution with 2-5% Al2O3 content.
3	Make a solution of Anionic flocculant with 0.1% concentration.
4	It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, BWD-01 works not well.
5	Add PAC solution, mix with effluent completely. about 1-3 minutes
6	Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7	Add small content of anionic polyelectrolyte solution, and mix slowly to have big floc. (this step is a suggestion)
8	Sedimentation
9	Check color for treated effluent
10	Adjust the dosage of BWD-01 and PAC to do more tests to have a better testing result.

Plastic Wastewater Treatment Decolorant Agent 55295-98-2 Polyaluminium Chloride

Water Purifying Chemicals