
Add to Cart
Water Treatment Chemistry for Wastewater Treatment in Paint Industry Cationic Polymer Ink Wastewater Decoloring
Description:
Specifications:
Appearance: | Colorless and Translucid Liquid |
Solid Content: | 50% or more |
Viscosity(25°C, cps): | 50-300 |
PH Value (30% Water Solution): | 3-6 |
Specific Gravity (at 20°C): | 1.1-1.3 |
Water Solubility: | Completely Soluble With Water at Any Rate |
Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Storage Temperature: | Room temperature |
Competitive Advantage:
1 | It is a non-pollution (no heavy metal ions etc.) chemical, with high performance treating high-colority wastewater from textile dyeing mills and other fields. |
3 | Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
4 | Can be used as a retention agent in paper & pulp processing |
7 | It can be used before or after biological treatment, with few effects on the MBR system. |
8 | Less sludge is produced than other inorganic coagulants. |
Application Methods:
1 | Have effluent sample from the ETP. |
2 | Mix BWD-01 with fresh water 40-50 times completely, to get 2-2.5% concentration solution. |
3 | Have PAC solution with 2-5% Al2O3 content. |
4 | Have a solution of PAM with 0.1% concentration. |
5 | Before dosing, adjusting the effluent pH value to 8-10 is important, at higher or lower pH, BWD-01 works not well. |
6 | Dose PAC solution, and mix with effluent completely. about 1-3 minutes |
7 | Dose BWD-01 solution, mix with effluent completely, about 5-10 minutes |
8 | Add small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (this step is a suggestion) |
9 | Sedimentation |
10 | Check the color of treated effluent, and calculate the dosage. |
Package and Storage:
Bluwat BWD Plant Snapshot: