BWD-01 water decoloring agent was launch in 90's, had been developed by BLUWAT with 10 years, stable quality, it is a new type of high-performance decolorizing flocculant, high performance in de-coloring, flocculating, CODcr decreasing and other applications, used to remove color of wastewater generated by textiles process houses and dyes industries and other fields.
It has high color removal of dye wastewater, by providing a large number of cations, the negative charge is brought on dye molecules are neutralized instability, at the same time with BWD-01 Water Decoloring Agent by a large number of hydrolysis of flocs. Can be adsorbed dye, destabilization of the snare, from water separation, so as to achieve the purpose of bleaching.
The colored effluents, generated by the industries, when left untreated, play havoc with reusable water resources. For process houses, in water scarce areas, it comes as heaven-sent facilitating recycling of the industrial effluent into process water. BWD-01 Water Decoloring Agent is used to solve this problem.
Application: water purifying agents, cationic polymers water treatment, water treatment flocculation, industrial waste water treatment

Specifications:

Appearance:	Colorless Liquid
Solid Content:	50%min
Viscosity(25°C, cps):	50-300
PH Value (30% Water Solution):	3-6
Specific Gravity (at 20°C):	1.1-1.3
Water Solubility:	Completely Soluble With Water at Any Rate
Package:	30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum
Storage Temperature:	Room temperature

Competitive Advantage:

1	High performance treating high-colority effluent from textile dyeing mills, pigment mills, printing ink and paper mils.
2	As flocculant to de-color high-colority effluent from dyestuffs processing plants.
3	Stronger decolorization (50%~99%) and removal of COD (50%~80%).
4	Can be used as a retention agent in the paper & pulp processing
5	Faster sedimentation, better flocculation.
6	Non-pollution (no aluminum, chlorine, heavy metal ions etc.).
7	It can be used before or after biological treatment.
8	Less sludge produced than other inorganic coagulants.

Application Methods:

1	Before use, to make BWD-01 with fresh water 40-50times, to have 2-2.5% concentration solution.
2	Make PAC solution with 2-5% Al2O3 content.
3	Make a solution of Anionic flocculant with 0.1% concentration.
4	It is very important, to adjust the effluent pH value to 8-10, higher or lower pH, BWD-01 works not well.
5	Add PAC solution, mix with effluent completely. about 1-3 minutes
6	Add BWD-01 solution, mix with effluent completely, about 5-10 minutes
7	Add small content of anionic polyelectrolyte solution, mix slowly to have big floc. (this step is a suggestion)
8	Sedimentation
9	Check color for treated effluent
10	Adjust dosage of BWD-01 and PAC to do more test to have a better testing result.

Package and Storage:

Packed in 30kgs, 50kgs, 250kgs net plastic drums and 1250kgs net IBC drums, or others according to the requirements of clients.
Suggested to store in room temperature, would show slightly stratification or appear white at low temperature, cannot be placed in the sun.

Product Tags:

decoloring agent water treatment

colorant water treatment

Inquiry Cart 0