Yixing bluwat chemicals co.,ltd
Add to Cart
Metal Wastewater Purifying Chemicals Water Treatment Flocculant Polyacrylamide
Blufloc Polyacrylamide Description:
Blufloc A-3510 Specifications:
| Appearance: | Off-White Granular Powder | |
| Ionic Charge: | Anionic/cationic/non-ionic | |
| Particle Size: | 20-100 mesh | |
| Molecular Weight: | Low to Medium | |
| Hydrolysis Degree: | Medium | |
| Solid Content: | 89% Min | |
| Approximate Brookfield viscosity at 25° C: | @ 1.0% | >800 |
| @ 0.50% | >400 | |
| @ 0.25% | >150 | |
| Bulk Density: | About 0.6-0.8 | |
| Specific Gravity at 25°C: | 1.01-1.1 | |
| Recommended Working Concentration: | 0.1-0.5% | |
| PH (1% aqua solution): | 6-9 | |
| Storage Temperature (°C): | 0 - 35 | |
| Shelf Life: | 2 years | |
Blufloc A-3510 Application Fields:
As flocculants for water treatment, including the steel industry effluent treatment
Thickening agent for Textile printing and coating
Coal washing and sedimentation
Wet strengthening agent, resident agent for papermaking
Sugar Refining and juice clarifying
Blufloc Polyacrylamide Competitive Advantage:
| 1 | Economical to use - lower dosage levels. |
| 2 | Easily soluble in water; dissolves rapidly. |
| 3 | Non corrosive of suggested dosage, economical and effective at low levels. |
| 4 | Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
| 5 | 10 years manufacturing experience, with more than 20 technical engineers |
Blufloc Polyacrylamide Application Methods:
| 1 | Dissolving concentration: | Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration. |
| 2 | Dissolving time: | The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. |
| 3 | Agitation speed: | The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank. |
| 4 | Application and Dosage: | The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage. |
Blufloc Polyacrylamide Package and Storage:
Blufloc Polyacrylamide Picture
