
Add to Cart
Granular Form Ferric Sulphate Coagulant for Water Treatment Chemicals
Description:
Specifications:
Total iron%: | ≥21% |
Fe3+ Content (%): | 19 Min. |
Reduced matter(as Fe2+)%: | ≤1.0% |
Entire iron(mass fraction): | ≥20% |
Basicity: | 8-16% |
As %: | ≤0.0001 |
Pb %: | ≤0.0006 |
PH(1% water solution): | 2.0-3.0 |
Insoluble Substances (%): | 1.0 Max. |
Application Fields:
Competitive Advantage:
1 | Fast settle, the time is about 5-30min, with other equipment, the speed will be faster |
2 | Fine effect, no iron ion is transfered into water in 10 folds dosage. |
3 | Stable, the solution can be reserved in long time, no deposit and degrade or block the pipe. |
4 | It can remove various impurities, especially for COD and BOD. |
5 | The application PH is 4-11, best is 6-9, it can decrease PH and hardnessof water |
6 | Safe, reliable, nonpoisonous and harmless: doesn’t contain any harmful substances such as aluminum, chlorine, heavy metal ions, and water phase transference of iron ions. PH barely changes after treatment, and has little corrosiveness effect the equipment. |
Application Methods:
1 | Dissolved in pond in 20-50% concentration, stirred it, then standing to till the water is brown red |
2 | Its dosage is equal to polyaluminium chloride, is 1/3~1/4 of solid aluminum sulfate. The solution follows the concentration. |
3 | During use, feeding the product by measure tank. |
4 | Watch the sediment forming state. |
Note | Dosage is according to different lab test |
Package and Storage:
Bluwat Ferric Sulphate Plant Snapshot:
Bluwat Main Products: