Yixing bluwat chemicals co.,ltd
Add to Cart
99% Decolorization Color Removal Chemical
Description:
Specifications:
| Appearance: | Translucid Liquid and Colorless |
| Solid Content: | >50% |
| Specific Gravity at 20°C: | 1.1-1.3 |
| PH Value (30% Solution): | 3-6 |
| Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
Competitive Advantage:
| 1 | Very fast sedimentation and good flocculation in pretreatment suggested using with polyaluminium chloride together to reduce the cost. |
| 2 | Used to de-color high-colority effluent from dyestuffs plants. |
| 3 | Stronger decolorization (50%~99%) and removal of COD (50%~80%). |
| 4 | High performance to treat wastewater with Soluble and Insoluble dyestuffs, for example, Reactive, Acid, Disperse, Direct Dyestuff etc. |
| 5 | Used to treat wastewater from textile and dyeing industry, pigment industry, printing ink industry, and paper industry. |
| 6 | Non-pollution (no aluminum, chlorine, heavy metal ions etc.). |
| 7 | It can be used before or after biological treatment. |
| 8 | Less sludge produced than other inorganic coagulants. |
Application Methods:
| 1 | Prepare solution first, mix color remocal chemical with 40 times water to have 2.5% solution. |
| 2 | Mix polyaluminium chloride with water to get solution of 2-5% Al2O3 content. |
| 3 | Have solution of Anionic Polyacrylamide, 0.1% concentration. |
| 4 | Have effluent, test pH value, adjust pH value to 8-10.(It is very important to let color removal cheical works well) |
| 5 | Add PAC solution, mix with effluent completely. about 1-3 minutes |
| 6 | Add BWD-01 solution, mix with effluent completely, about 5-10 minutes |
| 7 | Add small content of anionic polyacrylamide solution, mix slowly to have big floc. |
| 8 | Sedimentation, Check color for treated effluent |
Package and Storage:
Bluwat BWD Plant Snapshot:
