Yixing bluwat chemicals co.,ltd
Add to Cart
BWD-01 Water Decoloring Agent Color Removal Water Treatment Chemicals ISO9001 SGS BV
TDS BWD-01 Water Decoloring Agent - Bluwat.pdf
Description:
Specifications:
| Appearance: | Colorless to yellowish translucid liquid |
| Solid Content: | ≥50% |
| PH Value (30% Solution): | 2.5-5 |
| Viscosity(25°C,cps): | 50-300 |
| Package: | 30kgs net plastic drum, 250kgs net plastic drum palletized, 1250kgs net IBC drum |
| Storage Temperature: | Room temperature(10-35℃) |
Application Fields:
Competitive Advantage:
| 1 | Strong decolorization with 50~99%. |
| 2 | Good COD decreasing. |
| 3 | Good working to treat wastewater with water-soluble dyes. |
| 4 | Used to treat wastewater from the textile and dyeing industry, pigment industry, printing ink industry, and paper industry. |
| 6 | Faster sedimentation, better flocculation. |
| 7 | Non-pollution (no aluminum, chlorine, heavy metal ions, etc.). |
| 8 | It can be used before or after biological treatment. |
| 9 | Less sludge is produced than other inorganic coagulants. |
Application Methods:
| 1 | Make a solution of BWD-01, and mix it with 40 times water to have a 2.5% solution for use. |
| 2 | Make PAC solution, 2-5% Al2O3 |
| 3 | Have a solution of Anionic Polyelectrolyte, 0.1%. |
| 4 | Have effluent, test pH value, and adjust pH value to 8-9. (It is very important, higher or lower pH, BWD-01 works not well) |
| 5 | Add PAC solution, and mix with effluent completely. about 1-3 minutes |
| 6 | Add BWD-01 solution, and mix with effluent completely, about 5-10 minutes |
| 7 | Add small content of anionic polyelectrolyte solution, and mix slowly to have a big floc. (this step is a suggestion) |
| 8 | Sedimentation |
| 9 | Check the color of treated effluent |
| 10 | Adjust the dosage of BWD-01 and PAC to do more tests to have a better testing result. |
Package and Storage:
Bluwat BWD Plant Snapshot:
