PHPA is a simple name for Partially hydrolyzed Polyacrylamide.
As a leading manufacturer in China, we are exporting our Polyacrylamide to international markets for over 10 years.
PHPA A-6518 grade (APAM) is a water-soluble polymer formed from acrylamide (a compound with the molecular formula C3H5NO) subunits.
Anionic Polyacrylamide has a big range of high molecular weights from 5-25 million, with an anionic charge density ranging from 10-60%.
It is most often used to increase the viscosity of water (creating a thicker solution) or to encourage the flocculation of particles present in water.
For the oil drilling field, it is mainly used together in Bentonite mud, as the additive, and mixed with Polyanionic Cellulose, Bentonite, etc.
A leading manufacturer in China for Polyacrylamide over 10 years.

Blufloc PHPA A-6518 Specifications:

Appearance:		Off-White Granular Powder
Ionic Charge:		Anionic
Particle Size:		20-100 mesh
Molecular Weight:		High
Hydrolysis Degree:		Medium
Solid Content:		89% Min
Approximate Brookfield viscosity at 25° C:	@ 1.0%	>1500
	@ 0.50%	>600
	@ 0.25%	>300
Bulk Density:		About 0.6-0.8
Specific Gravity at 25°C:		1.01-1.1
Recommended Working Concentration:		0.1-0.5%
PH (1% aqua solution):		6-9
Storage Temperature (°C):		0 - 35
Shelf Life:		2 years

Blufloc A-6518 Application Fields:

Blufloc PHPA A-6518 Competitive Advantage:

1	High Molecular weight with High charge degree polymer
2	Economical to use - lower dosage levels.
3	Easily soluble in water; dissolves rapidly.
4	Noncorrosive of suggested dosage, economical, and effective at low levels.
5	Can eliminate the use of alum & further ferric salts when used as primary coagulants.
6	Reduction in the sludge of the dewatering process system.
7	Faster sedimentation, better flocculation.
8	Non-pollution (no aluminum, chlorine, heavy metal ions, etc.).
9	10 years of manufacturing experience, with more than 20 technical engineers

Application Methods:

1	Dissolving concentration:	Polyacrylamide (polyelectrolyte/flocculant) should be standardly dissolved to 0.1-0.5% concentration.
2	Dissolving time:	The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature, and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. An incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant.
3	Agitation speed:	The ideal revolution of the agitator is between 200-400rpm. A high-speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be 1HP for a 1-2m3 mixing tank.
4	Application and Dosage:	The dosage range varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage.
5	Jar Test:	Put a sample of effluent in a beaker and add it as designated, agitate for 1 minute at 100-120 rpm and then slowly agitate at 60 rpm. Determine the flocs properly at this time and note the sedimentation and clarity of the top solution.

Blufloc A-6518 Package and Storage:

Packed in Kraft or PE bags with inner plastic bags, with each bag containing 15,25kgs, or 750kgs net big bag.
Stored in original packaging in a cool and dry place, away from sources of heat, flame, and direct sunlight.

Blufloc A-6518 Anionic Polyacrylamide Picture:

Product Tags:

hydraulic lubricant oil

drilling fluid lubricant

Inquiry Cart 0