Yixing bluwat chemicals co.,ltd
Add to Cart
Blufloc A-3510 Anionic Polyacrylamide Medium Molecular Weight Polymer , CAS No. 9003-05-8
A-3510 Grade
Blufloc A-3510 Description:
Blufloc A-3510 Specifications:
| Appearance: | Off-White Granular Powder | |
| Ionic Charge: | Anionic | |
| Particle Size: | 20-100 mesh | |
| Molecular Weight: | Low to Medium | |
| Hydrolysis Degree: | Medium | |
| Solid Content: | 89% Min | |
| Approximate Brookfield viscosity at 25° C: | @ 1.0% | >800 |
| @ 0.50% | >400 | |
| @ 0.25% | >150 | |
| Bulk Density: | About 0.6-0.8 | |
| Specific Gravity at 25°C: | 1.01-1.1 | |
| Recommended Working Concentration: | 0.1-0.5% | |
| PH (1% aqua solution): | 6-9 | |
| Storage Temperature (°C): | 0 - 35 | |
| Shelf Life: | 2 years | |
Blufloc A-3510 Application Fields:
As flocculants for water treatment
Thickening agent for Textile printing and coating
Coal washing and sedimentation
Wet strengthening agent, resident agent for paper making
Sugar Refining and juice clarifying
Blufloc A-3510 Competitive Advantage:
| 1 | Economical to use - lower dosage levels. |
| 2 | Easily soluble in water; dissolves rapidly. |
| 3 | Non corrosive of suggested dosage, economical and effective at low levels. |
| 4 | Can eliminate the use of alum & further ferric salts when used as primary coagulants. |
| 5 | 10 years manufacturing experience, with more than 20 technical engineers |
Blufloc A-3510 Application Methods:
| 1 | Dissolving concentration: | Polyacrylamdie (polyelectrolyte/flocculant) should be standardly be dissolved to 0.1-0.5% concentration. |
| 2 | Dissolving time: | The time required to dissolve the flocculant varies according to the type of flocculant, water quality, temperature and agitation. However, most flocculants generally require around 1 hour of agitation to completely dissolve the powder. Incomplete mixture of flocculant or lumping may inhibit the performance of the flocculant. |
| 3 | Agitation speed: | The ideal revolution of the agitator is between 200-400rpm. A high speed agitator operating without reducing the revolution of a motor is not advised, since it may cut the molecules of the flocculant. An ideal agitator motor should be of 1HP for a 1-2m3 mixing tank. |
| 4 | Application and Dosage: | The dosage range of varies from 1 - 3.0 ppm depending upon the type of effluent and application. Advised to do jar tests for evaluating the functioning and approximate dosage. |
Blufloc A-3510 Package and Storage:
Blufloc A-3510 Anionic Polyacrylamide Picture
